Product Standards

 

BPS Memorandum Circular No. 15-3, s. 2015

List of Products under Mandatory Certification

Date of Issuance – January 28, 2015

Department Administrative Order No. 15-01, s. 2015

Measures to facilitate the issuance of the Import Commodity Clearance

Department Administrative Order No. 1, s. 1987

Standardization of Medical Grade Oxygen in Cylinders

Department Administrative Order No. 01, s. 1998

Repeal of DAO No. 8, series of 1996 and sub-section 1.5 of DAO No. 2, series of 1989

Date of Issuance – January 16, 1998

Department Administrative Order No. 01, s. 2006

Mandatory Philippine National Standard for Portland Cement

Date of Issuance – February 7, 2006

Department Administrative Order No. 10, s. 1999

Mandatory Philippine National Standard for Electrical Products – Boxes for rigid metal conduits

Date of Issuance – October 28, 1999

Department Administrative Order No. 10, s. 2008

Mandatory Philippine National Standard for Protective Helmets and their Visors for Drivers and Passengers of Motor Cycles and Mopeds

Date of Issuance – September 8, 2008

Department Administrative Order No. 09-10, s. 2009

Mandatory Philippine National Standard for hot-dip metallic-coated steel sheets for roofing

Date of Issuance – November 23, 2009

Department Administrative Order No. 11, s. 2006

Mandatory Philippine National Standard for Blended Hydraulic Cement with Pozzolan

Date of Issuance – November 28, 2006

Department Administrative Order No. 12, s. 2008

Mandatory Philippine National Standards related to the use of LPG and CNG in Motor Vehicles

Date of Issuance – September 29, 2008

Department Administrative Order No. 13, s. 2008

Mandatory Philippine National Standard for Fireworks

Date of Issuance – December 24, 2008

Department Administrative Order No. 02, s. 1998

Mandatory Philippine National Standard – All manufacturers, distributors, importers and retailers of monobloc chair, monobloc stool, and plastic table.

Date of Issuance – October 9, 1998

Department Administrative Order No. 02, s. 2001

Implementing Rules and Regulations of Republic Act No. 8970

Date of Issuance – May 11, 2001

Department Administrative Order No. 02, s. 2002

Defining the Responsibilities and Liabilities of Manufacturers, Importers, Traders, Wholesalers, Distributors, Retailers and or their Agents, with regard to products covered by Mandatory Product Certification and Prescribing Penalties for Violation thereof

Date of Issuance – July 01, 2002

Department Administrative Order No. 02, s. 2005

Mandatory Philippine National Standard (PNS) for Electric copper wires and cables

Date of Issuance – February 15, 2005

Department Administrative Order No. 14-2, s. 2014

Implementing Guidelines for the Mandatory Certification of Audio & Video Products covered by PNS IEC 60065:2007 – Audio, Video and Similar Electronic Apparatus – Safety Requirements

Date of Issuance – April 1, 2014

Department Administrative Order No. 3, s. 1987

Standardization of Fire Hose

Department Administrative Order No. 3, s. 1998

Mandatory Philippine National Standard – For all manufacturers, distributors, importers and retailers of lighters.

Date of Issuance – February 19, 1999

Department Administrative Order No. 03, s. 2001

Timetable for Compliance with RA 8970 (All manufacturers, importers, distributors, wholesalers andretailers of laundry and industrial detergents are given schedule/period within which to comply or make the necessary adjustments relative to the said IRR).

Date of Issuance – May 11, 2001

Department Administrative Order No. 03, s. 2008

Rules and Regulations concerning the Safety of Low Voltage Equipment

Date of Issuance – February 7, 2008

Department Administrative Order No. 11-03, s. 2011

Mandatory Philippine National Standard – All manufacturers, distributors, importers and retailers of safety glazing materials and their installation on vehicles, pneumatic tyres for motor vehicles and their trailers, and pneumatic tyres for commercial vehicles and their trailers.

Department Administrative Order No. 4, s. 1996

Mandatory Philippine National Standard – All manufacturers, distributors, importers and retailers of lamps, electric wires, kitchen appliances, and other house appliances.

Date of Issuance – June 10, 1996

Department Administrative Order No. 04, s. 2000

Mandatory Philippine National Standard – All manufacturers, distributors, importers and retailers of Safety matches for commercial purposes, Rubber inner tubes for pneumatic tires, and Sanitary wares.

Date of Issuance – August 9, 2000

Department Administrative Order No. 04, s. 2002

Mandatory Philippine National Standard for Safety-belts and Restraint Systems

Date of Issuance – July 31, 2002

Department Administrative Order No. 04, s. of 2008

The New Rules and Regulations concerning the Philippine Standard (PS) Quality and/or Safety Certification Mark scheme of the Bureau of Product Standards (BPS)

Date of Issuance – February 7, 2008

Department Administrative Order No. 11-04, s. 2011

Mandatory Philippine National Standards (PNS) for various electrical and electronics products

Department Administrative Order No. 5, s. 1987

Standardization of Ballasts for High Pressure Mercury Vapor Lamps

Department Administrative Order No. 5, s. 1991

Mandatory Philippine National Standard – All manufacturers, distributors, importers and retailers of Dry Chemical Fire Extinguishers, Halogenated Hydrocarbon (Halon Type) Portable Fire Extinguishers, and Pozzolan Cement.

Date of Issuance – February 27, 1991

Department Administrative Order No. 5, s. 1992

(Ammendment) Mandatory Philippine National Standard – All manufacturers, distributors, importers and retailers of Halogenated Hydrocarbon (Halon Type) Portable Fire Extinguishers.

Date of Issuance – January 14, 1993

Department Administrative Order No. 5, s. 1996

Guidelines for the Return or Disposal of DTI-BPS Tested Product Samples

Date of Issuance – July 11, 1996

Department Administrative Order No. 05, s. 1997

Amending PNS 15-5:1995, as implemented by DAO 6, series of 1996 This standard specifies requirements for metal bodied, clean extinguishing agent-halon substitute portable fire extinguishers without any special feature.

Date of Issuance – August 20, 1997

Department Administrative Order No. 05, s. 2000

Mandatory Philippine National Standards for Fire Protection and Fire Fighting Equipment

Date of Issuance – October 18, 2000

Department Administrative Order No. 05, s. 2002

Mandatory Philippine National Standard – All manufacturers, distributors, importers and retailers of Steel bars for concrete reinforcement and Rerolled steel bars for concrete reinforcement.

Date of Issuance – August 6, 2002

Department Administrative Order No. 05, s. 2008

The New Rules and Regulations concerning the Issuance of Import Commodity Clearance under the Product Certification Mark Scheme of the Bureau of Product Standards (BPS)

Date of Issuance – February 7, 2008

Department Administrative Order No. 10-05, s. 2010

Recall of PNS 127:2004 – Cold-reduced carbon steel sheet of commercial and drawing qualities – Specifications from the list of Mandatory Philippine National Standards

Date of Issuance – June 28, 2010

Department Administrative Order No. 6, s. 1987

Standardization of Pressurized Kerosene Stoves

Date of Issuance – July 23, 1987

Department Administrative Order No. 6, s. 1995

Mandatory Philippine National Standard – All manufacturers, distributors, importers and retailers of Pneumatic Tires (Specifications).

Date of Issuance – June 26, 1995

Department Administrative Order No. 6, s. 1996

Mandatory Philippine National Standard – All manufacturers, distributors, importers and retailers of Clean Extinguishing Agent – Halon Substitute Portable Fire Extinguisher (Specifications).

Date of Issuance – August 8, 1996

Department Administrative Order No. 06, s. 2004

Mandatory Philippine National Standards for Power transformers, power supply units and similar devices
Date of Issuance – May 6, 2004

Department Administrative Order No. 06, s. 2006

Mandatory Philippine National Standards for low carbon steel wires – Plain/annealed/zinc coated

Date of Issuance – July 5, 2006

Department Administrative Order No. 7, s. 1990

Policies and Guidelines on Metrication

Date of Issuance – April 26, 1990

Department Administrative Order No. 07, s. 2002

Mandatory Philippine National Standard – All manufacturers, distributors, importers and retailers of Polyethylene (PE) pipes for water supply and Grey iron pipes for pressure water lines.

Date of Issuance – August 27, 2002

Department Administrative Order No. 07, s. 2008

Mandatory Philippine National Standards for Equal Leg Angle Bars

Date of Issuance – March 24, 2008

Department Administrative Order No. 8, s. 1987

Standardization of Carbon Steel Wire Rods

Date of Issuance – July 23, 1987

Department Administrative Order No. 8, s. 1988

Labelling of Finished Textile Fabrics, Ready-Made Garments and Piece Goods

Department Administrative Order No. 08, s. 1997

Mandatory Philippine National Standards for switches for household and similar fixed-electrical installation; plugs and socket-outlets for household and similar purposes; and general use snap switches

Date of Issuance – November 5, 1997

Department Administrative Order No. 08, s. 2008

Mandatory Philippine National Standards for Zinc and Zinc-alloy-coated Steel Barbed Wires

Date of Issuance – August 15, 2008

Department Administrative Order No. 09-08, s. 2009

Guidelines on Warranties on Energy Efficient Lamps and Ballasts

Date of Issuance – November 3, 2009

Department Administrative Order No. 9, s. 1987

Standardization of Magnet Wires

Date of Issuance – July 23, 1987

Department Administrative Order No. 9, s. 1991

Amending DTI-DAO No. 7, series of 1990 – Policies and Guidelines on Metrication

Date of Issuance – July 23, 1991

Department Administrative Order No. 09, s. 1997

Prescribing a Revised Schedule of Testing Fees of the Bureau of Product Standards Testing Center

Date of Issuance – October 31, 1997

Department Administrative Order No. 09, s. 2006

Mandatory Philippine National Standards for Safety Glass for Road Vehicle

Date of Issuance – September 4, 2006

Department Administrative Order No. 02, s. 2017

New Guidelines for Mandatory Certification of Portland Cement and Blended Hydraulic Cement with Pozzolan Covered by PNS 07:2005 and PNS 63:2006 Respectively

Date of Issuance – March 17, 2017

Department Administrative Order No. 05, s. 2017

New Guidelines for Mandatory Certification of Portland Cement and Blended Hydraulic Cement with Pozzolan Covered by PNS 07:2005 and PNS 63:2006 Respectively

Date of Issuance – May 17, 2017

Department Administrative Order No. 06, s. 2017

New Rules and Regulations concerning the Mandatory Certification of Portland Cement and Blended Hydraulic Cement with Pozzolan

Date of Issuance – November 13, 2017

Department Administrative Order 19-15, Series of 2019

Guidelines for Registration of Installation Facilities of Speed Limiter.

Date of Issuance – May 19, 2019

Department Administrative Order No. 20-06 s. 2020

The New Technical Regulation Concerning the Mandatory Product Certification of Plywood.

Date of Issuance – October 8, 2020

Memorandum Circular No. 21-17, s. 2021

Supplemental Guidelines for the Implementation Of DAO 20-06, Series of 2020

Date of Issuance – May 7, 2021

Memorandum Circular No. 21-20, s. 2021

Supplemental Guidelines for the Implementation of DAO 20-03, Series of 2020

Date of Issuance – May 21, 2021